HBS664Y7-5 Ambient

hbs664y7-5
197 612 Ft
(155 600 Ft excl VAT)
5 5 1 Product
5 5 1 Product
+
–

brand: Ambient Ambient
sku: A80197

Coiled mixer/camera loom, SD664/633, w/ TC, 2 breakouts, XLR

The Coiled Breakaway Cable for Sound Devices 664 from Ambient Recording is used to connect a Sound Devices 664 mixer to a digital camcorder featuring a 5-pin XLR mono return to camera. It consists of three sections that come apart: two Y-breakout cables (one connects to mixer and one to camera) and a coiled breakaway cable in between. The overall extendable length of the cable is 15'.

Overview

XLR 7-Pin Male to XLR 7-Pin Female Coiled Mixer/Camera Loom Cable

The XLR 7-Pin Male to XLR 7-Pin Female Coiled Mixer/Camera Loom Cable from Ambient Recording is a breakaway cable that provides two balanced lines (single shielded) and two leads for the return signal. The coiled cable reaches from over four feet when at rest, all the way to over sixteen feet when extended.

The cable features a 7-pin XLR male connector on one end, and a 7-pin XLR female at the other. The cable needs the appropriate breakout cable adapters (Y-cables) for use with specific mixer and camera combinations.

 HBYATC-L-7-35W Breakout Y-Cable for Sound Devices 664 Mixer with Timecode Lemo

The HBYATC-L-7-35W Breakout Y-Cable from Ambient Recording features the mixer-side Y-cable for a Sound Devices 664 mixer-camera loom. At one end of this Y cable is a 7-pin XLR connector. On the other end are two XLR connectors, one 3.5mm TRS, and a 5-pin Lemo connector.

  • 7-pin XLR male to dual 3-pin XLR female
  • Mono return via 3.5mm TRS right angle
  • 5-pin Lemo (TC-OUT) connector for timecode
  • To be used in conjunction with the HBS7-7 camera loom and HBY7TC-35, HBY7TC-35W, or HBY7TC-5 camera-side breakout cables

HBY7TC-5 Breakout Cable

The Ambient Recording HBY7TC-5 Breakout Cable allows you to connect devices with a 7-pin XLR female connector to those with dual 3-pin XLR male connectors. It also features return via Mono return via 5-pin XLR female.

  • 7-pin XLR female to dual 3-pin XLR male
  • Mono return via 5-pin XLR female
  • BNC right angle plug for time code from the camera to the SD 552, SD 633, or SD 664 mixer

Recently viewed:

DPA 4080 Mini Windjammer
2020-06-11 13:39
Product Code: 055426 Suitable for use DPA 4080 Main Benefits: High-level protection against wind noise for lavalier mics in the open air Reduce
Black Lavalier Windjammer - single
2020-06-11 13:39
Product Code: 065514 Suitable for use with Lavalier Mic Foams Main Benefits: High-level protection against wind noise for lavalier mics in the op
Windjammer 295 (Black)
2020-06-11 13:39
Product Code: 021511 Suitable for use with the Windshield 295 Main Benefits: Specially designed for the purpose - our Windjammer® give the most
Grey Lavalier Windjammer - single
2020-06-11 13:39
Product Code: 065515 Suitable for use with Lavalier Mic Foams Main Benefits: High-level protection against wind noise for lavalier mics in the op
Schoeps WKC 5 Active cable for Colette, angled version, 5m
2023-08-23 15:10
Schoeps WKC 5 Active cable for Colette, angled version, 5m
HC-22 Shotgun Microphone
2021-09-21 16:26
HC-22 Shotgun Microphone (22cm)  {tab Tech Specs} Frequency Range (+/-3 dB) 50 Hz - 20kHz Self-Noise (DIN/IEC) 6.0 dB-A Polar Pat
AHK-20 MKII
2024-02-24 22:35
ASF-1 MKII hydrophone cable 20m
Modular Windshield 3 Kit (Black Windjammer)
2020-06-11 13:39
Product Code: 086025 Modular Windshield 3 Kit With Black Wj3
QP480-SCS
2017-04-12 16:53
QP 480 boom pole with straight cable installed, stereo XLR-5 Designed by Ambient Recording, the QP 480-SCS Mini Feature-Film Boom Pole extends up to
Connbox CB3 (2XLR-3F)
2020-06-11 13:39
Product Code: 016924 The Connbox has been designed to isolate and greatly reduce handling and cable-borne noise to the microphone. Connbox 3 is suit
keyboard_arrow_up