• search

Schoeps BL CCM 3 Boundary-Layer Microphone for fixed table installations Schoeps

blccm3lg
blccm3lgschoeps-grenzfl_tagesschau-2
797 255 Ft
(627 760 Ft excl VAT)
5 5 1 Product
5 5 1 Product
+
–

brand: Schoeps Schoeps
sku: S121501
1-2m.gif

Schoeps BL CCM 3 Boundary-Layer Microphone for fixed table installations

This special version of the CCM 3 Lg compact microphone is equipped with a flange enabling it to be built into the surface of a table or speaker's rostrum. This makes the microphone nearly invisible, and at the same time improves the sound quality by eliminating comb filter effects.

  • hemispherical pickup pattern
  • for building in to the surface of a table or lectern
  • unobtrusive
  • avoids “comb filter” effect

Specifications

All CCMs
Current consumption with 12 V 8 mA
Current consumption with 48 V 4 mA
Impedance 90 Ω
Minimum recommended load impedance 600 Ω
Low-cut frequency 20 Hz
Length (L version) without connector: 46 – 58 mm
Length (U version) 46 – 58 mm
Diameter 20 mm
Weight (U-version) 33 g
Weight (L-version) 43 g
Surface finish matte gray

For further specifications see those of the corresponding capsule:

Specifications
Recording angle °
Frequency range 20-20000
Sensitivity 15
Maximum sound pressure level at 0.5% THD 130
Equivalent noise level (A-weighted) 11
Equivalent noise level (CCIR) 23
Signal-to-noise ratio (A-weighted) 83
Recording angle °
Recording angle °
Length of the cable  
Length (Cables) 25 + 10
Recording angle 25+ 500 °
Length of the cable 5
Length of the cable 10
Length of the cable 5
Recording angle 75 °
Frequency range 20-20000
Sensitivity 15
Equivalent noise level (A-weighted) 11
Equivalent noise level (CCIR) 23
Signal-to-noise ratio (A-weighted) 83
Maximum sound pressure level at 0.5% THD 130
Powering voltage 12/48
Current consumption with 12 V 8
Current consumption with 48 V 4
Impedance 90
Minimum recommended load impedance 600
Low-cut frequency 20
Length (L version) 33
Recording angle 43 °
Frequency range 40- 20000
Sensitivity 13
Equivalent noise level (A-weighted) 15
Equivalent noise level (CCIR) 24
Signal-to-noise ratio (A-weighted) 79
Maximum sound pressure level at 0.5% THD 132
Frequency range 30-20000
Sensitivity 13
Equivalent noise level (A-weighted) 15
Equivalent noise level (CCIR) 25
Signal-to-noise ratio (A-weighted) 79
Maximum sound pressure level at 0.5% THD 132
Frequency range 30-20000
Sensitivity 10
Equivalent noise level (A-weighted) 16
Equivalent noise level (CCIR) 26
Signal-to-noise ratio (A-weighted) 78
Maximum sound pressure level at 0.5% THD 134
Frequency range 30-20000
Sensitivity 13
Equivalent noise level (A-weighted) 15
Equivalent noise level (CCIR) 25
Signal-to-noise ratio (A-weighted) 79
Maximum sound pressure level at 0.5% THD 132
Frequency range 20-20000
Sensitivity 15
Equivalent noise level (A-weighted) 12
Equivalent noise level (CCIR) 23
Signal-to-noise ratio (A-weighted) 82
Maximum sound pressure level at 0.5% THD 130
Frequency range 20-20000
Sensitivity 12
Equivalent noise level (A-weighted) 12
Equivalent noise level (CCIR) 24
Signal-to-noise ratio (A-weighted) 82
Maximum sound pressure level at 0.5% THD 132
Frequency range 20-20000
Sensitivity 10
Equivalent noise level (A-weighted) 14
Equivalent noise level (CCIR) 26
Signal-to-noise ratio (A-weighted) 80
Frequency range 40-20000
Sensitivity 13
Equivalent noise level (A-weighted) 16
Equivalent noise level (CCIR) 24
Signal-to-noise ratio (A-weighted) 78
Maximum sound pressure level at 0.5% THD 132
Frequency range 40- 20000
Sensitivity 13
Equivalent noise level (A-weighted) 15
Equivalent noise level (CCIR) 24
Signal-to-noise ratio (A-weighted) 79
Maximum sound pressure level at 0.5% THD 132
Frequency range 40- 20000
Sensitivity 13
Equivalent noise level (A-weighted) 14
Equivalent noise level (CCIR) 24
Signal-to-noise ratio (A-weighted) 80
Maximum sound pressure level at 0.5% THD 132
Frequency range 20- 20000
Sensitivity 11
Equivalent noise level (A-weighted) 14
Equivalent noise level (CCIR) 26
Signal-to-noise ratio (A-weighted) 80
Maximum sound pressure level at 0.5% THD 132
Frequency range 40- 20000
Sensitivity 13
Equivalent noise level (A-weighted) 16
Equivalent noise level (CCIR) 25
Signal-to-noise ratio (A-weighted) 78
Maximum sound pressure level at 0.5% THD 132
Frequency range 40- 16000
Sensitivity 10
Equivalent noise level (A-weighted) 18
Equivalent noise level (CCIR) 26
Signal-to-noise ratio (A-weighted) 76
Maximum sound pressure level at 0.5% THD 134
Frequency range 20-20000
Sensitivity 16
Equivalent noise level (A-weighted) 11
Equivalent noise level (CCIR) 23
Signal-to-noise ratio (A-weighted) 83
Maximum sound pressure level at 0.5% THD 130
Frequency range 20-20000
Sensitivity 16
Equivalent noise level (A-weighted) 11
Equivalent noise level (CCIR) 23
Signal-to-noise ratio (A-weighted) 83
Maximum sound pressure level at 0.5% THD 130
Frequency range 40- 20000
Maximum sound pressure level at 0.5% THD 132
Equivalent noise level (A-weighted) 14
Equivalent noise level (CCIR) 24
Current consumption with 12 V 8
Current consumption with 48 V 4
Minimum recommended load impedance 90
Maximum output voltage 1
Recording angle 95 °
Frequency range 40-20000
Sensitivity 13
Equivalent noise level (A-weighted) 16
Equivalent noise level (CCIR) 26
Signal-to-noise ratio (A-weighted) 78
Maximum sound pressure level at 0.5% THD 132
Maximum output voltage 1
Impedance 35
Minimum recommended load impedance 600
Powering voltage 12/48
Current consumption 2 x 4
Microphone spacing 170
Dimensions  
Recording angle 90 °
Frequency range 18-16000
Sensitivity 100
Equivalent noise level (A-weighted) 17
Equivalent noise level (CCIR) 25
Signal-to-noise ratio (A-weighted) 77
Maximum sound pressure level at 0.5% THD 123
Maximum output voltage 2.8
Impedance 60
Minimum recommended load impedance 600
Powering voltage 12/48
Current consumption ca. 4.4
Length (Cables) 25 + 10
Recording angle 25 + 500 °
Length of the cable 5
Length of the cable 10
Length of the cable 20
Dimensions 2 × 2 conductors, screened, XLR-5
Thread 3/8
Length of the cable 2
Dimensions  
Input Switchable between two XLR-3F sockets and a special input for t
Input impedance 20k
Frequency response 20-80k
Recommended minimum sensitivity of condenser microphones at XLR inputs 8
Maximum input level for 0.5% THD at 4 dB gain setting: 14 dBV (5Vrms), at 20 dB gain setting: -2
Gain 4, 10, 20, 30 or 40 dB
Level indicators -20dB, -3dB
Output impedance 100
Maximum output level for 0.5% THD 18dBV (8Veff)
Minimum recommended load impedance 2k
Impedance of the headphones 32 – 2k
Output socket 1/4
Supply voltage 5-15V, internally stabilized
Dimensions 162mm × 60mm × 172mm
Current consumption 2 x 4
Powering voltage 12/48
Maximum output voltage 0.95
Impedance 60
Minimum recommended load impedance 600
Low-cut frequency 20
Powering voltage 12/48
Current consumption with 12 V 8
Current consumption with 48 V 4
Recording angle 120 °
Analog Inputs 2 × 2, XLR-5F, balanced, transformerless, 48 V phantom powering
Dimensions  
Dimensions  
Dimensions  
Dimensions  
Dimensions  
Dimensions  
Dimensions  
Dimensions  

Recently viewed:

i-3prhtfg-x2
The Short-Haired Spacer Cover, Green - Medium
2022-09-20 15:12
For use in light to medium winds, The Short-Haired Spacer Cover, helps you strike a balance between wind protection and frequency transparency when us
BBI-SCSGR-M
055381_12cm_sgm_windjammer
12cm SGM Mini Windjammer for foam
2020-06-11 13:39
Product Code: 055381 Suitable for 12cm SGM Foam Main Benefits: Using both foam and windjammer together provides up to 20dB wind and pop Excelle
RYC055381
hbs12ty10-35w
HBS12TY10-35W
2024-02-24 22:35
Coiled mixer/camera loom, Tajimi 12-pin to HR10M + HBY10-35W The 4.5 to 16.4' Tajimi 12-Pin Male to Hirose 10-Pin Female Coiled Breakaway Cable with
A80180
a-boom
A-BOOM - Accessory plate for A10-TX
2018-06-01 08:21
A-BOOM - Accessory plate for A10-TX Accessory plate for mounting  the A10-TX onto microphone boom poles with 3/8 inch thread top screw.
A-BOOM
a-xlr
A-XLR - XLR adapter for A10-RX receiver conversion
2018-06-01 08:19
A-XLR - XLR adapter for A10-RX receiver conversion XLR and power cable adapter to convert the A10-RX-SL to XLR connections.
A-XLR
e6ow7bmo-black
E6 Omnidirectional Earset Mic with Highest Overload for Wireless Transmitters - No Cable, Black
2017-10-18 11:24
E6 Omnidirectional Earset Mic with Highest Overload for Wireless Transmitters - No Cable, Black The black E6 Omnidirectional Earset Mic with Highest
E6OW7BMO
i-w4ndzk7-x2
The Short-Haired Spacer Cover, Blue - Large
2022-09-20 15:15
For use in light to medium winds, The Short-Haired Spacer Cover, helps you strike a balance between wind protection and frequency transparency when us
BBI-SCSBL-L
cos-11dpt-rm-bk-18
COS-11DPT-RM / 1.8 - Fekete
2017-08-16 09:55
COS-11DPT-RM / 1.8 - Black Lavalier Microphone with 1.8.m cable stripped end, no connector, 9dB attenuated sensitivity, with accessories. {tab Main
COS-11DPT-RM/1.8-BK
lockitslatetake2_detailfront_391140995
ACN-LS2D LockitSlate Display Take 2
2024-02-24 22:35
ACN-LS2D LockitSlate Display Take 2 What's new compared to the previous LockitSlate? The same simple operation via 3 buttons as with the Lockit
A80954
sc_03_023_sgv
Schoeps SGV Stand clamp for V4
2023-08-23 15:10
Schoeps SGV Stand clamp for V4 The base of the SGV has a 5/8"-27 NS internal thread. A threaded adapter is supplied for 3/8" and 1/2" mounting. The a
S161112
keyboard_arrow_up