Windbubble (Single) - Lav Size 3, White Bubblebee Industries

• The Windbubbles are build to stay safe and secure on the Lavalier microphone, and therefore comes in four different sizes.
• The frequency through the Windbubble is very close to the microphones natural sound.
• The wind reduction is the best in the industry, thanks to the bubble-effect in the design
• The short hair of the fur gives the Windbubble a rounded and organic shape.
• The fur is less shiny to blend better with skin, clothes and other surroundings.
• Available in six different colors make is easier to find a Windbubble for every occasion.
• Designed in Denmark by sound lovers, for sound lovers

The Bubblebee Windbubbles consist of an outer shell of the finest imitation fur and an inner core of nothing. And this nothing is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside.

So instead of the wind hammering on the microphone and making those horrible “I’m in the middle of a hurricane”- sounds, it passes right through.

The Windbubbles are specially constructed to be mounted quickly and easily on the specified types of microphone and to not fall off during use.

The tiny elastic wire legs make it easy to mount the Windbubbles on the Lavalier microphones

LAV Size 1; elastic opening: 28 mm (1.10”)
Built for microphones with a diameter of 3,0-4,0 mm:
Sanken: COS-11 (without metal windscreen)
Countryman: B6, B2D, E6
Sennheiser: MKE 1

LAV Size 2; elastic opening: 35 mm (1.38”)
Built for microphones with a diameter of 5,0-8,0 mm:
Sanken COS-11 (with metal windscreen)
Countryman B3
DPA 4060 (without metal windscreen)
Sennheiser MKE 2

LAV Size 3; elastic opening: 40 mm (1.57”)
Built for microphones with a diameter of 5,0-9,0 mm:
Sanken COS-11 (with metal windscreen)
Countryman EMW
DPA 4060 (without metal windscreen)
Sennheiser MKE 2 (without MZW 2 windshield)

LAV Size 4; elastic opening: 42 mm (1.65”)
Built for microphones with a diameter of 8,0-13,0 mm:
Sanken COS-11 (with large metal windscreen)
Countryman EMW
DPA 4060 (with metal windscreen)
Sennheiser: ME 4, ME 102 & ME 104 (with metal MZW 2 windshield)

The Windbubbles will give you the best wind protection you can get for you lavalier mic. Whatever the make, shape or size of it, we have made a furry Windbubble to fit, just waiting to keep the wind out and the clean, clear sound frequencies in.

There are four sizes, with the internal 'Bubble of dead air', opening and length of fur increasing progressively with each step. If your mic fits in more than one, for example the DPA 4060 which fits with both sizes 2 and 3, you will achieve greater wind resistance with size 3 because of the longer fur, though will in turn compromise a little on visibility.