HORUS DA8 Module Merging

horus-da8
614 553 Ft
(483 900 Ft nettó)
5 5 1 Product
5 5 1 Product
+

gyártó: Merging Merging
termékkód: IOM-H-DA8

HORUS DA8 Module

The DA8 (up to 192kz) and the DA8P (up to DSD) have consistently shown in testing to be the quietest multichannel D/A conversion modules available anywhere.

Main Benefits

  • 123dB Signal to noise ratio (SNR)
  • Power up/power down auto-mutes (speaker protection)
  • Assignable Line up levels
  • Auto-mute circuitry for “no-pop” power cycling
  • Digitally controlled trims for line up procedures
  • Dynamic range of 127dB (typ.)
  • Easy to set dip switches for international operating levels

Legutóbb megtekintett:

Nagra Pico Mini Windjammer (new style)
2017-02-10 19:06
Product Code: 055443 Suitable for Nagra Pico Main Benefits: Blog, interview or podcast in any weather Available for over a dozen types of recor
Schoeps PAD 20 C Attenuator for Colette, 20dB
2023-08-23 15:10
Schoeps PAD 20 C Attenuator for Colette, 20dB Under extreme conditions, even a SCHOEPS Colette series microphone can be overdriven by very high sound
Schoeps Suction cup Ø 50 mm with magnet
2023-08-23 15:10
Schoeps Suction cup Ø 50 mm with magnet S302039 Mounting adapter for CMC 1 KV
Schoeps K 20 LU Adapter cable for CCM, Lemo-XLR3m, 20m
2023-08-23 15:10
Schoeps K 20 LU Adapter cable for CCM, Lemo-XLR3m, 20m This is the adapter cable from the Lemo output connec tor of the CCM _L Compact Condenser Micr
24cm Classic-Softie (19/22)
2020-06-11 13:39
Product Code: 033072 The Softie Windshield is a slip-on open-cell foam, with integral fur cover. The Softie will reduce wind-noise, protect your mic
Plastic case for COS-11DPT and COS-11DR
2017-08-16 10:59
Plastic case for COS-11DPT and COS-11DR
30/55 Reporter Mic Foam (Single)
2020-06-11 13:39
Product Code: 104403 Suitable for reporter mics of 30 mm diameter, with slots no further than 55 mm from the front of the mic. Main Benefits: Up
Schoeps STR 100 Support rod, 12mm, 10cm
2023-08-23 15:10
Schoeps STR 100 Support rod, 12mm, 10cm These support rods have complementary 3/8" threads on each end and can thus be screwed together in any combin
keyboard_arrow_up